Configuring System Logging
set logging local
Use this command to configure log messages to the console and a persistent file.
Syntax
set logging local console {enable | disable} file {enable | disable}
Parameters
console enable |
disable
file enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This command shows how to enable logging to the console and disable logging to a persistent file:
Matrix(rw)->set logging local console enable file disable
clear logging local
Use this command to clear the console and persistent store logging for the local session.
Syntax
clear logging local
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear local logging:
Matrix(rw)->clear logging local
10-12 System Logging Configuration
Enables or disables logging to the console.
Enables or disables logging to a persistent file.
set logging local