Set Router Limits (Lsnat) - Enterasys Matrix DFE-Gold Series Configuration Manual

set router limits (LSNAT)

Usage
This command must be executed from the switch CLI.
Examples
This example displays all router limits for this system:
Matrix(su)->show router limits
LSNAT maximum Bindings
LSNAT Cache size
LSNAT maximum Configs
NAT maximum Bindings
NAT Cache size
NAT maximum dynamic mapping Configs
NAT maximum static mapping Configs
NAT maximum Interface Configs
NAT maximum global address Configs
NAT maximum global port Configs
Route Table Limit
TWCB maximum Bindings
TWCB Cache size
TWCB maximum Configs
This example displays the LSNAT cache‐size limit for this system:
Matrix(su)->show router limits lsnat-cache
LSNAT Cache size
set router limits (LSNAT)
Use this command to set LSNAT router limits.
Syntax
set router limits [lsnat-bindings lsnat-bindings] | [lsnat-cache lsnat-cache] |
[lsnat-configs lsnat-configs]
Parameters
lsnat‐bindings
lsnat‐bindings
lsnat‐cache lsnat‐cache (Optional) Sets the LSNAT cache size limit.
lsnat‐configs
lsnat‐configs
Configuring Load Sharing Network Address Translation (LSNAT)
(Optional) Sets the LSNAT maximum bindings limit.
(Optional) Sets the LSNAT configuration limit for the number of server
farms, virtual servers, direct access entries, real servers, and client
access entries.
The lsnat-configs value can range from 1 to 50. The number specified
will have the following effect:
•
1 to 50 server farms, virtual servers, and direct access entries can be
configured
•
10 to 500 real servers and client access entries can be configured
Enterasys Matrix DFE-Gold Series Configuration Guide 19-33
- 32000 (default)
- 2000 (default)
- 50 (default)
- 32000 (default)
- 2000 (default)
- 10 (default)
- 50 (default)
- 103 (default)
- 1000 (default)
- 32000 (default)
- 12000 (default)
- 32000 (default)
- 2000 (default)
- 1 (default)
- 2000 (default)