Understanding Transparent Web Cache Balancing (TWCB)
Example
This example adds the server farm s1Server to the cache1 web‐cache:
Matrix(rw)->Router(config)#ip twcb webcache cache1
Matrix(rw)->Router(config-twcb-webcache)#serverfarm s1Server
bypass-list range
Use this command to specify web host sites for which HTTP requests are not redirected to the
cache servers.
Syntax
bypass-list range begin-ip-address end-ip-address
Parameters
begin‐ip‐address
end‐ip‐address
Defaults
None.
Mode
Router command, Cache Server Configuration mode: Matrix(rw)‐>Router(config‐twcb‐
webcache)#.
Usage
Some web site hosts require source IP address authentication for user access. HTTP requests for
these sites can not be redirected to the cache servers. This command provides for the creation of
lists of IP addresses that need to bypass the cache servers.
Example
This example creates a bypass list for web‐cache cache1 for IP address range 50.10.10.30 to
50.10.10.43:
Matrix(rw)->Router(config)#ip twcb webcache cache1
Matrix(rw)->Router(config-twcb-webcache)#bypass-list range 50.10.10.30
50.10.10.43
hosts redirect range
Use this command to explicitly permit or deny redirection of HTTP requests for the list of end
users to this web‐cache.
Syntax
hosts {permit | deny} redirect range begin-ip-address end-ip-address
23-10 Transparent Web Cache Balancing Configuration
Specifes an IP address that begins a range of IP addresses of sites for
which HTTP requests are not redirected to the cache servers.
Specifies an IP address that ends a range of IP addresses of sites for
which HTTP requiests are not redirected to the cache servers.
bypass-list range