Set Cli Completion; Loop - Enterasys Matrix DFE-Gold Series Configuration Manual

set cli completion

Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to set the command prompt to Switch 1:
Matrix(rw)->set prompt "Switch 1"
Switch 1(rw)->
set cli completion
Use this command to enable or disable the CLI command completion function. When enabled, this
allows you to complete a unique CLI command fragment using the keyboard spacebar.
Syntax
set cli completion {enable | disable} [default]
Parameters
enable | disable
default
Defaults
If not specified, the status setting will not be maintained as the default.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable the CLI command completion function and maintain it as the
default setting:
Matrix(rw)->set cli completion enable default

loop

Use this command to execute a command loop.
Syntax
loop count [delay] [-r]
Enables or disables the CLI command completion function.
(Optional) Maintains the status for all future sessions.
Enterasys Matrix DFE-Gold Series Configuration Guide 2-45
Setting Basic Device Properties