Sample Mnemonic Values For Logging Applications - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring System Logging
Defaults
• If level is not specified, none will be applied.
• If server is not specified, messages will be sent to all Syslog servers.
Mode
Switch command, Read‐Write.
Usage
Mnemonic values are case sensitive and must be typed as they appear in Table 10‐3.
Table 10-3 Sample Mnemonic Values for Logging Applications
Mnemonic
AAA
AddrNtfy
CLI
FlowLimit
LACP
OSPF
Router
RtrAcl
RtrFE
RtrArpProc
RtrLSNat
SNMP
System
Trace
UPN
VRRP
Webview
Example
This example shows how to set the severity level for SSH (Secure Shell) to 4 so that error
conditions will be logged for that application and sent to Syslog server 1:
Matrix(rw)->set logging application SSH level 4 server 1
10-10 System Logging Configuration
Application
Authentication, Authorization, & Accounting
Address Add and Move Notification
Command Line Interface
Flow Limiting
Link Aggregation Control Protocol
Open Shortest Path First Routing Protocol
Router
Router Access Control List
Router Forwarding Engine
Router Arp Process
Router Load Sharing Network Address Translation
Simple Network Management Protocol
Non-Application items such as general blade/chassis/
configurations, etc.
Router Tracing
User Personalized Networking
Virtual Router Redundancy Protocol
Webview Device Management
set logging application