Chapter 3: Discovery Protocols Configuration; Displaying Neighbors; Purpose; Command - Enterasys Matrix DFE-Gold Series Configuration Manual

This chapter describes how to configure the discovery protocols supported by the firmware using
CLI commands.
For information about...

Displaying Neighbors

Enterasys Discovery Protocol

Cisco Discovery Protocol
Link Layer Discovery Protocol and LLDP-MED
Displaying Neighbors

Purpose

The show neighbors command displays neighbor discovered by all support discovery protocols.

Command

For information about...

show neighbors

show neighbors
Use this command to display Network Neighbor Discovery information from all supported
discovery protcols.
Syntax
show neighbors [port-string]
Parameters
port‐string
Discovery Protocols Configuration
(Optional) Displays Network Neighbor Discovery information for a
specific port. For a detailed description of possible port‐string values,
refer to "Port String Syntax Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 3-1
3
Refer to page...
3-1
3-3
3-8
3-15
Refer to page...
3-1