Understanding Transparent Web Cache Balancing (TWCB)
Examples
This example sets the maximum number of connections for cache server 186.89.10.51 to 100 and
activates the server:
Matrix(rw)->Router(config)#ip twcb wcserverfarm s1Server
Matrix(rw)->Router(config-twcb-wcsfarm)#cache 186.89.10.51
Matrix(rw)->Router(config-twcb-cache)#maxconns 100
Matrix(rw)->Router(config-twcb-cache)#inservice
This example adds the web‐cache server farm s1Server to the cache1 web‐cache and activates the
web‐cache:
Matrix(rw)->Router(config)#ip twcb webcache cache1
Matrix(rw)->Router(config-twcb-webcache)#serverfarm s1Server
Matrix(rw)->Router(config-twcb-webcache)#inservice
ip twcb webcache
Use this command to create a web‐cache using the specified name.
Syntax
ip twcb webcache web-cache-name
Parameters
web‐cache‐name
Defaults
None.
Mode
Router Configuration mode: Matrix(rw)‐>Router(config)#.
Usage
Before a web‐cache can be put in service there must be at least one cache server associated with it
that is in service.
Executing this command enters web‐cache comfiguration command mode.
Example
This example creates a web‐cache named cache1:
Matrix(rw)->Router(config)#ip twcb webcache cache1
Matrix(rw)->Router(config-twcb-webcache)#
23-8 Transparent Web Cache Balancing Configuration
Specifies the name of the web‐cache to be created. Firmware supports
the creation of 1 web‐cache.
ip twcb webcache