Ip Irdp Holdtime - Enterasys Matrix DFE-Gold Series Configuration Manual

ip irdp holdtime

Usage
The "no" form of this command deletes the custom holdtime setting and resets the minimum
advertisement interval to the default value of three‐fourths of the maxadvertinterval value.
Example
This example shows how to set the minimum IRDP advertisement interval to 500 seconds on
VLAN 1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip irdp minadvertinterval 500
ip irdp holdtime
Use this command to set the length of time in seconds IRDP advertisements are held valid.
Syntax
ip irdp holdtime holdtime
no irdp holdtime
Parameters
holdtime
Defaults
None.
Mode
Router command, Interface configuration: Matrix>Router(config‐if(Vlan 1))#
Usage
Hold time is automatically set at three times the maxadvertinterval value when the maximum
advertisement interval is set as described in "ip irdp maxadvertinterval" on page 21‐56 and the
minimum advertisement interval is set as described in "ip irdp minadvertinterval" on page 21‐56.
The "no" form of this command resets the hold time to the default value of three times the
maxadvertinterval value.
Example
This example shows how to set the IRDP hold time to 4000 seconds on VLAN 1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip irdp holdtime 4000
Specifies the hold time in seconds. Valid values are 0 to 9000.
Enterasys Matrix DFE-Gold Series Configuration Guide 21-57
Configuring IRDP