Enterasys Matrix DFE-Gold Series Configuration Manual page 406

Enabling/Disabling GVRP
Parameters
join
leave
leaveall
port‐string
Defaults
At least one optional parameter must be entered.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the GARP leave timer to 60 centiseconds on Fast Ethernet port 5
in module 2:
Matrix(rw)->clear garp timer leave fe.2.5
7-28 802.1Q VLAN Configuration
(Optional) Resets the join timer to 20 centiseconds.
(Optional) Resets the leave timer to 60 centiseconds.
(Optional) Resets the leaveall timer to 1000 centiseconds.
Specifies the port(s) on which to reset GARP timer(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
clear garp timer