clear netflow export-interval
clear netflow export-interval
Use this command to clear NetFlow export interval to its default of 30 minutes.
Syntax
clear netflow export-interval
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to return the NetFlow export interval to its default value:
Matrix(rw)->clear netflow export-interval
set netflow port
Use this command to enable NetFlow collection on a port.
Syntax
set netflow port port-string {enable | disable}
Parameters
port‐string
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable NetFlow collection on port ge.1.1:
Matrix(rw)->set netflow port ge.1.1 enable
Specifies the port or ports on which to enable or disable NetFlow
collection.
Enables or disables NetFlow collection.
Enterasys Matrix DFE-Gold Series Configuration Guide 15-7
Configuring NetFlow