Show Lldp - Enterasys Matrix DFE-Gold Series Configuration Manual

show lldp

For information about...
clear lldp
clear lldp port status
clear lldp port trap
clear lldp port med-trap
clear lldp port location-info
clear lldp port network-policy
clear lldp port tx-tlv
show lldp
Use this command to display LLDP configuration information.
Syntax
show lldp
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display LLDP configuration information.
Matrix(ro)->show lldp
Message Tx Interval
Message Tx Hold Multiplier : 4
Notification Tx Interval
MED Fast Start Count
Tx-Enabled Ports
Rx-Enabled Ports
Trap-Enabled Ports
MED Trap-Enabled Ports
: 30
: 5
: 3
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12; tg.6.1-2; fe.7.1-48
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12;tg.6.1-2; fe.7.1-48
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12; tg.6.1-2; fe.7.1-48
: ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12;tg.6.1-2; fe.7.1-48
Enterasys Matrix DFE-Gold Series Configuration Guide 3-17
Link Layer Discovery Protocol and LLDP-MED
Refer to page...
3-34
3-34
3-35
3-35
3-36
3-36
3-37