Set Tacacs; Show Tacacs Server - Enterasys Matrix DFE-Gold Series Configuration Manual

set tacacs

set tacacs
Use this command to enable or disable the TACACS+ client.
Syntax
set tacacs {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
The TACACS+ client can be enabled on the switch anytime, with or without a TACACS+ server
online. If the TACACS+ server is offline and TACACS+ is enabled, the login authentication is
switched to RADIUS or local, if enabled.
Examples
This example shows how to enable the TACACS+ client.
Matrix(rw)->set tacacs enable

show tacacs server

Use this command to display the current TACACS+ server configuration.
Syntax
show tacacs server {index | all}
Parameters
index
all
Defaults
None.
Mode
Switch command, Read‐Only.
Enables or disables the TACACS client.
Display the configuration of the TACACS+ server identified by
index
The value of can range from 1 to 2,147,483,647.
Display the configuration for all configured TACACS+ servers.
Enterasys Matrix DFE-Gold Series Configuration Guide 25-65
Configuring TACACS+
index
.