Set Snmp Group; Show Snmp Group Output Details - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring SNMP Users, Groups and Communities
Storage type
Row status
Security model
Security/user name
Group name
Storage type
Row status
Table 5‐6 shows a detailed explanation of the command output.
Table 5-6 show snmp group Output Details
Output...
Security model
Security/user name
Group name
Storage type
Row status

set snmp group

Use this command to create an SNMP group. This associates SNMPv3 users to a group that shares
common access privileges.
Syntax
set snmp group groupname user user security-model {v1 | v2c | usm} [volatile |
nonvolatile]
Parameters
groupname
user user
security‐model v1 |
v2c | usm
volatile | nonvolatile
Defaults
If storage type is not specified, nonvolatile storage will be applied.
Mode
Switch command, Read‐Write.
5-14 SNMP Configuration
= nonVolatile
= active
= SNMPv1
= public.router
= Anyone
= nonVolatile
= active
What it displays...
SNMP version associated with this group.
User belonging to the SNMP group.
Name of SNMP group.
Whether entry is stored in volatile, nonvolatile or read-only memory.
Status of this entry: active, notInService, or notReady.
Specifies an SNMP group name to create.
Specifies an SNMPv3 user name to assign to the group.
Specifies an SNMP security model to assign to the group.
(Optional) Specifies a storage type for SNMP entries associated with the
group.
set snmp group