set multiauth precedence
lag.0.46
lag.0.47
lag.0.48
set multiauth precedence
Use this command to set the system's multiple authentication administrative precedence.
Syntax
set multiauth precedence {[dot1x] [mac] [pwa] [cep]}
Parameters
dot1x
mac
pwa
cep
Defaults
From high to low precedence: dot1x, pwa, mac, cep.
Mode
Switch command, Read‐Write.
Usage
When a user is successfully authenticated by more than one method at the same time, the
precedence of the authentication methods will determine which RADIUS‐returned filter ID will be
processed and result in an applied traffic policy profile.
Example
This example shows how to set precedence for MAC authentication:
Matrix(rw)->set multiauth precedence mac
clear multiauth precedence
Use this command to clear the system's multiple authentication administrative precedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
0
0
0
0
0
0
Sets precedence for 802.1X authentication.
Sets precedence for MAC authentication.
Sets precedence for port web authentication.
Sets precedence for CEP authentication
0
0
0
0
0
0
Enterasys Matrix DFE-Gold Series Configuration Guide 27-5
Configuring Multiple Authentication