clear multiauth port
Parameters
mode auth‐opt |
auth‐reqd | force‐
auth | force‐unauth
numusers numusers
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Examples
This example shows how to set the port multiple authentication mode to required on ge.3.14:
Matrix(rw)->set multiauth port mode auth-reqd ge.3.14
clear multiauth port
Use this command to clear multiple authentication properties for one or more ports.
Syntax
clear multiauth port {[mode] [numusers] port-string}
Parameters
mode
numusers
port‐string
Defaults
None.
Mode
Switch command, Read‐Write.
Examples
This example shows how to clear the port multiple authentication mode on all 1‐Gigabit Ethernet
ports:
Matrix(rw)->clear multiauth port mode ge.*.*
Specifies the port(s)' multiple authentication mode as:
•
auth‐opt — Authentication optional
•
auth‐reqd — Authentication required
•
force‐auth — Authentication considered
•
force‐unauth — Authentication disabled
Specifies the number of users allowed authentication on port(s).
Specifies the port(s) on which to set multiple authentication properties.
Clears the port(s)' multiple authentication mode.
Clears the value set for the number of users allowed authentication on
port(s).
Specifies the port(s) on which to clear multiple authentication
properties.
Enterasys Matrix DFE-Gold Series Configuration Guide 27-7
Configuring Multiple Authentication