clear snmp view
Example
This example shows how to set an SNMP MIB view to "public" with a subtree name of 1.3.6.1
included:
Matrix(rw)->set snmp view viewname public subtree 1.3.6.1 included
clear snmp view
Use this command to delete an SNMPv3 MIB view.
Syntax
clear snmp view viewname subtree
Parameters
viewname
subtree
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to delete SNMP MIB view "public":
Matrix(rw)->clear snmp view public 1.3.6.1
Specifies the MIB view name to be deleted.
Specifies the subtree name of the MIB view to be deleted.
Enterasys Matrix DFE-Gold Series Configuration Guide 5-25
Configuring SNMP MIB Views