Clear Snmp Group; Show Snmp Community - Enterasys Matrix DFE-Gold Series Configuration Manual

clear snmp group

Example
This example shows how to create an SNMP group called "anyone", assign a user named "public"
and assign SNMPv3 security to the group:
Matrix(rw)->set snmp group anyone user public security-model usm
clear snmp group
Use this command to clear SNMP group settings globally or for a specific SNMP group and user.
Syntax
clear snmp group groupname user [security-model {v1 | v2c | usm}]
Parameters
groupname
user
security‐model v1 |
v2c | usm
Defaults
If not specified, settings related to all security models will be cleared.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear all settings assigned to the "public" user within the SNMP group
"anyone":
Matrix(rw)->clear snmp group anyone public

show snmp community

Use this command to display SNMP community names and status. In SNMPv1 and v2,
community names act as passwords to remote management.
Syntax
show snmp community [name]
Parameters
name
Defaults
If name is not specified, information will be displayed for all SNMP communities.
Mode
Switch command, Read‐Only.
Specifies the SNMP group to be cleared.
Specifies the SNMP user to be cleared.
(Optional) Clears the settings associated with a specific security model.
(Optional) Displays SNMP information for a specific community name.
Enterasys Matrix DFE-Gold Series Configuration Guide 5-15
Configuring SNMP Users, Groups and Communities