Ip Twcb Wcserverfarm - Enterasys Matrix DFE-Gold Series Configuration Manual

ip twcb wcserverfarm

For information about... (continued)
bypass-list range
hosts redirect range
ip twcb redirect out
show ip twcb wcserverfarm
show ip twcb webcache
show ip twcb conns
show ip twcb stats
clear ip twcb statistics
show limits
set router limits (TWCB)
show router limits (TWCB)
clear router limits (TWCB)
ip twcb wcserverfarm
Use this command to create a web‐cache server farm.
Syntax
ip twcb wcserverfarm serverfarm-name
Parameters
serverfarm‐name
Defaults
None.
Mode
Router Configuration: Matrix(rw)‐>Router(config)#.
Usage
Executing this command enters server farm configuration command mode.
Example
This example creates the s1Server web‐cache server farm:
Matrix(rw)->Router(config)#ip twcb wcserverfarm s1Server
Matrix(rw)->Router(config-twcb-wcsfarm)#
Specifies a server farm name. A maximum of 5 web‐cache server farms
are supported.
Enterasys Matrix DFE-Gold Series Configuration Guide 23-3
Understanding Transparent Web Cache Balancing (TWCB)
Refer to page...
23-10
23-10
23-11
23-12
23-13
23-13
23-14
23-14
23-15
23-15
23-16
23-17