Set Port Enable; Show Port Alias - Enterasys Matrix DFE-Gold Series Configuration Manual

set port enable

set port enable
Use this command to administratively enable one or more ports.
Syntax
set port enable port-string
Parameters
port-string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable Fast Ethernet port 3 in module1:
Matrix(rw)->set port enable fe.1.3

show port alias

Use this command to display alias name(s assigned to one or more ports.
Syntax
show port alias [port-string]
Parameters
port-string
Defaults
If port‐string is not specified, aliases for all ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display alias information for fe.3.1. In this case, an alias has not been
assigned:
Matrix(rw)->show port alias fe.3.1
Alias not assigned on port fe.3.1.
Specifies the port(s) to enable. For a detailed description of possible
port‐string values, refer to "Port String Syntax Used in the CLI" on
page 4‐2.
(Optional) Displays alias name(s) for specific port(s). For a detailed
description of possible port‐string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Enterasys Matrix DFE-Gold Series Configuration Guide 4-21
Disabling / Enabling and Naming Ports