Show Debugging; No Debug Ip Packet - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Debug IP Packet
Parameters
None.
Defaults
None.
Mode
Router command, Router configuration: Matrix>Router(config)#
Router Exec: Matrix>Router#
Usage
By default, 30 packet will be display and then the packet monitor will stop. To collect another 30
packets, use this command. The default of 30 can be modified with the debug ip packet access‐
group limit parameter.
Example
This example shows how to restart the debug IP packet utility:
Matrix(rw)->Router(config)#debug ip packet restart

show debugging

Use this command to display the debug IP Packet utility settings.
Syntax
show debugging
Parameters
None.
Defaults
None.
Mode
Router command, Router configuration: Matrix>Router(config)#
Example
This example shows how to display the debug IP packet utility settings:
Matrix(rw)->Router(config)#show debug
IP Packet debugging is on, with access-group 1 throttle 5 limit 20 verbose

no debug ip packet

Use this command to disable the debug IP packet utility.
Syntax
no debug ip packet
16-32 IP Configuration
show debugging