Configuring Load Sharing Network Address Translation (LSNAT)
faildetect acv-reply
Use this command to set the expected validation ACV reply string from the server application
port.
Syntax
faildetect acv-reply "reply-string"
Parameters
reply‐string
Defaults
None.
Mode
Router command, SLB Real Server Configuration mode: Matrix>Router(config‐slb‐real)#
Usage
The reply to the ACV command‐string is validated against the ACV reply‐string specified in this
command.
Example
This example expects to receive "200 OK" in reply to the command string sent to the server
application port 7:
Matrix>Router(config)#ip slb serverfarm SF-UPD
Matrix>Router(config-slb-sfarm)#real 10.1.2.4 port 7
Matrix>Router(config-slb-real)#faildetect type app udp
Matrix>Router(config-slb-real)#faildetect acv-reply "200 OK"
Matrix>Router(config-slb-real)#inservice
faildetect acv-quit
Use this command when the protocol requires the user to issue a command to close the session.
Syntax
faildetect acv-quit "quit-string"
Parameters
quit‐string
Defaults
None.
Mode
Router command, SLB Real Server Configuration mode: Matrix>Router(config‐slb‐real)#
19-16 LSNAT Configuration
Specifies the expected reply returned from the server to the command
string sent to the server.
Specifies the quit string expected by the ACV session.
faildetect acv-reply