Show Ip Vrrp - Enterasys Matrix DFE-Gold Series Configuration Manual

show ip vrrp

Defaults
None.
Mode
Router command, Interface configuration: Matrix>Router(config‐if(Vlan 1))#
Usage
The "no" form of this command clears VRRP MD5 authentication.
Example
This example shows how to set the VRRP MD5 authentication password to "qwer" on VLAN 1,
VRID 1:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip vrrp message-digest-key 1 md5 qwer
show ip vrrp
Use this command to display VRRP routing information.
Syntax
show ip vrrp
Parameters
None.
Defaults
None.
Mode
Router command, Any router mode.
Example
This example shows how to display VRRP information:
Matrix>Router(config)#show ip vrrp
-----------VRRP CONFIGURATION-----------
Vlan
256
Table 21‐7 provides an explanation of the command output.
Vrid State Owner
1 Backup
AssocIpAddr
0 172.3.56.20
172.3.56.21
172.3.56.22
Enterasys Matrix DFE-Gold Series Configuration Guide 21-71
Configuring VRRP
Priority VirtMacAddr
100 0000.5e00.0101