Show Igmp Number-Groups - Enterasys Matrix DFE-Gold Series Configuration Manual

show igmp number-groups

Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display the IGMP counters:
Matrix(rw)->show igmp counters
Igmp Counters:
Igmp Group Table is Full
Igmp Version 1 Queries transmitted
Igmp Version 2 Queries transmitted
Igmp Version 3 Queries transmitted
Igmp Group Specific Queries transmitted
Igmp Queries received
Igmp Version 1 Joins received
Igmp Version 2 Joins received
Igmp Version 3 Joins received
Igmp Leave Groups received
Igmp Dropped Frames
Usage
show igmp number-groups
Use this command to display the number of multicast groups supported by the Enterasys Matrix
device.
Syntax
show igmp number-groups
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐write.
Usage
The command displays both the currently active number of groups and the configured number
that will take effect at the next reboot.
: false
: 0
: 1016368
: 0
: 0
: 776482
: 0
: 1024
: 22
: 0
: 22
Enterasys Matrix DFE-Gold Series Configuration Guide 9-17
Configuring IGMP