Set Forcelinkdown; Clear Forcelinkdown - Enterasys Matrix DFE-Gold Series Configuration Manual

set forcelinkdown

set forcelinkdown
Use this command to enable or disable the force link down function. When enabled, this forces
ports in the "operstatus down" state to become disabled.
Syntax
set forcelinkdown {enable | disable}
Parameters
enable | disable
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to enable the force link down function:
Matrix(rw)->set forcelinkdown enable

clear forcelinkdown

Use this command to resets the force link down function to the default state of disabled.
Syntax
clear forcelinkdown
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset the force link down function to disabled:
Matrix(rw)->clear forcelinkdown
Enables or disables the force link down function on all ports.
Enterasys Matrix DFE-Gold Series Configuration Guide 4-23
Disabling / Enabling and Naming Ports