Configuring Policy Profiles; Purpose; Commands; Show Policy Profile - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Policy Profiles

Configuring Policy Profiles

Purpose

To review, create, change and remove policy profiles for managing network resources.

Commands

For information about...

show policy profile

set policy profile
clear policy profile
show policy invalid
set policy invalid action
clear policy invalid action
Assigning Classification Rules to Policy Profiles
show policy profile
Use this command to display policy profile information.
Syntax
show policy profile {all | profile-index [consecutive-pids] [-verbose]}
Parameters
all | profile‐index
consecutive‐pids
‐verbose
Defaults
If optional parameters are not specified, summary information will be displayed for the specified
index or all indexes.
Mode
Switch command, Read‐Only.
Example
This example shows how to display policy information for policy profile 11:
Matrix(rw)->show policy profile 11
Profile Index
Profile Name
8-2 Policy Classification Configuration
Displays policy information for all profile indexes or a specific profile
index.
(Optional) Displays information for specified consecutive profile
indexes.
(Optional) Displays detailed information.
:11
:MacAuth1
show policy profile
Refer to page...
8-2
8-3
8-5
8-5
8-6
8-6
8-7