Show Console Parity; Set Console Parity - Enterasys Matrix DFE-Gold Series Configuration Manual

show console parity

Defaults
If port‐string is not specified, stop bits per character will be cleared for all console ports.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear stop bits per character for console port com.1.1:
Matrix(rw)->clear console stopbits com.1.1
show console parity
Use this command to display the type of parity checking set for one or more console ports.
Syntax
show console parity [port-string]
Parameters
port‐string
Defaults
If port‐string is not specified, parity type for all console ports will be displayed.
Mode
Switch command, Read‐Only.
Example
This example shows how to display parity type for console port com.1.1:
Matrix(rw)->show console parity com.1.1
Port
------------
com.1.1

set console parity

Use this command to set the parity type for one or more console ports.
Syntax
set console parity {none | odd | even | mark | space} [port-string]
Parameters
none
odd
(Optional) Displays parity type for specific console port(s).
Parity
--------
none
Specifies that no parity checking will be performed.
Enables odd parity checking.
Enterasys Matrix DFE-Gold Series Configuration Guide 4-11
Setting Console Port Properties