Show Dot1X Auth-Config - Enterasys Matrix DFE-Gold Series Configuration Manual

show dot1x auth-config

Matrix(rw)->show dot1x auth-stats fe.1.1
Port: 1
EAPOL Frames Rx:
EAPOL Frames Tx:
EAPOL Start Frames Rx:
EAPOL Logoff Frames Rx:
EAPOL RespId Frames Rx:
EAPOL Resp Frames Rx:
EAPOL ReqId Frames Tx:
EAPOL Req Frames Tx:
Invalid EAPOL Frames Rx:
EAP Length Error Frames Rx: 0
Last EAPOL Frame Version:
Last EAPOL Frame Source:
show dot1x auth-config
Use this command to display 802.1X authentication configuration settings for one or more ports.
Syntax
show dot1x auth-config [authcontrolled-portcontrol] [keytxenabled] [maxreq]
[quietperiod] [reauthenabled] [reauthperiod] [servertimeout] [supptimeout]
[txperiod] [port-string]
Parameters
authcontrolled‐
portcontrol
keytxenabled
maxreq
quietperiod
reauthenabled
reauthperiod
servertimeout
supptimeout
Auth-Stats:
0
0
0
0
0
0
0
0
0
0
0:0:0:0:0:0
(Optional) Displays the current value of the controlled Port control
parameter for the Port.
(Optional) Displays the state of 802.1X key transmission currently in
use by the authenticator PAE state machine.
(Optional) Displays the value set for maximum requests currently in
use by the backend authentication state machine.
(Optional) Displays the value set for quiet period currently in use by the
authenticator PAE state machine.
(Optional) Displays the state of reauthentication control used by the
Reauthentication Timer state machine.
(Optional) Displays the value, in seconds, set for the reauthentication
period used by the reauthentication timer state machine.
(Optional) Displays the server timeout value, in seconds, currently in
use by the backend authentication state machine.
(Optional) Displays the authentication supplicant timeout value, in
seconds, currently in use by the backend authentication state machine.
Configuring 802.1X Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 25-5