Table of Contents
Advertisement
show ip pim neighbor
Parameters
interface
Defaults
If not specified, information about all PIM interfaces will be displayed.
Mode
Router command, Privileged EXEC: Matrix>Router#
Example
This example shows how to display PIM interface information
Matrix>Router#show ip pim interface
Address
------------------------------------------------------------------------------
35.0.0.1
23.0.0.1
20.0.0.2
10.0.0.1
Table
17‐2 provides an explanation of the command output.
Table 17-2 show ip pim interface Output Details
Output...
Address
Vlan
Ver/Mode
Nbr-Count
Query-Intvl
DR-Prior
DR
show ip pim neighbor
Use this command to display information about discovered PIM neighbors.
Syntax
show ip pim neighbor [interface]
(Optional) Displays information about a specific PIM interface. This
interface must be enabled with PIM as described in "ip pim sparse
mode" on page 17‐2.
Vlan
Ver/Mode Nbr-Count Query-Intvl DR-Prior
35
v2/S
23
v2/S
20
v2/S
10
v2/S
What it displays...
IP address of the PIM interface.
VLAN ID of the PIM interface.
Version and mode (sparse or dense) of PIM running on the interface.
Total number of PIM neighbors on the interface, discovered by
receiving PIM hello messages from other PIM routers on the interface.
Interval between Hello messages. Default is 30 seconds.
Designated router priority value on the interface. Set with the ip pim
dr-priority command
IP address of the designated router on the LAN.
1
30
0
30
0
30
2
30
("ip pim
dr-priority" on page 17-3).
Enterasys Matrix DFE-Gold Series Configuration Guide 17-7
Configuring PIM
DR
1
35.0.0.2
1
23.0.0.1
1
20.0.0.2
87
10.0.0.1
- Quick Links:
- Set Ip Address
Hide quick links:
Advertisement
Table of Contents
