Sticky; Show Ip Slb Reals - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Load Sharing Network Address Translation (LSNAT)
Example
This example shows how to specify Least Connections as the server selection algorithm for the
"httpserver" server farm:
Matrix>Router(config)#ip slb serverfarm httpserver
Matrix>Router(config-slb-sfarm)#predictor leastconns

sticky

Use this command to configure sticky session persistence for this server farm.
Syntax
sticky
no sticky
Parameters
None.
Defaults
None.
Mode
Router command, SLB Server Farm Configuration mode: Matrix>Router(config‐slb‐sfarm)#
Usage
See "Sticky Persistence Configuration Considerations" on page 19‐2 for more information.
This command is used in conjunction with the persistence level sticky command described in
"persistence level" on page 19‐25.
The "no" form of this command removes this server farm using persistence sticky.
Example
This example shows how to set sticky persistence for the "lsnat" server farm:
Matrix>Router(config)#ip slb serverfarm lsnat
Matrix>Router(config-slb-sfarm)#sticky

show ip slb reals

Use this command to display information about the real servers.
Syntax
show ip slb reals [detail | serverfarm serverfarmname [detail]]
19-10 LSNAT Configuration
sticky