Show Netflow - Enterasys Matrix DFE-Gold Series Configuration Manual

show netflow

For information about...
clear netflow cache
set netflow export-destination
clear netflow export-destination
set netflow export-interval
clear netflow export-interval
set netflow port
clear netflow port
set netflow export-version
clear netflow export-version
set netflow template
clear netflow template
show netflow
Use this command to display NetFlow configuration information and/or statistics.
Syntax
show netflow [config [port-string]] [statistics [export]]
Parameters
config
statistics
export
port‐string
Defaults
If config is entered by no port‐string, information for all ports is displayed.
If statistics is entered but not export, all statistics are displayed.
Mode
Switch command, Read Only.
Example
This example shows how to display both Netflow configuration information and statistics:
Matrix(rw)->show netflow
Cache Status:
Destination IP:
Destination UDP Port:
Export Version:
(Optional) Show the NetFlow configuration.
(Optional) Show the NetFlow statistics.
(Optional) Show the NetFlow export statistics.
Specifies the port or ports to display.
enabled
10.10.1.1
2055
5
Enterasys Matrix DFE-Gold Series Configuration Guide 15-3
Configuring NetFlow
Refer to page...
15-4
15-5
15-5
15-6
15-7
15-7
15-8
15-8
15-9
15-9
15-11