Show Router Limits (Twcb) - Enterasys Matrix DFE-Gold Series Configuration Manual

Understanding Transparent Web Cache Balancing (TWCB)
Parameters
twcb‐bindings
twcb‐bindings
twcb‐cache twcb‐cache
twcb‐configs
twcb‐configs
Defaults
None.
Mode
Switch Command: Matrix(rw)‐>.
Usage
Bindings and cache use valuable memory resources and are shared on a first come first serve basis
across a number of applications. Use this command to free memory resources to be user by other
applications by limiting the number of TWCB bindings and cache size allowed.
Currently, only a single web‐cache is supported. The TWCB configs setting exists for future use.
The chassis or system must be rebooted for any new change to take effect.
This command must be executed from the switch CLI.
Example
This example sets the maximum TWCB cache size to 5000:
Matrix(rw)-> set router limits twcb-cache 5000

show router limits (TWCB)

Use this command to display TWCB router limit configuration settings.
Syntax
show router limits [twcb-bindings] [twcb-cache] [twcb-configs]
Parameters
twcb‐bindings
twcb‐cache
twcb‐configs
Defaults
If no parameter is specified, all router limit settings are displayed.
23-16 Transparent Web Cache Balancing Configuration
(Optional) Specifies the maximum number of TWCB bindings for this
router. Values range from 1000 to 32000. Default value of 32000.
(Optional) Specifies the maximum TWCB cache size for this router.
Values range from 500 to 10000. Default value of 2000.
(Optional) Specifies the maximum number of web‐cache configurations.
Maximum and Default value of 1.
Note: Router limits can also be set in the following contexts:
To set LSNAT router limits see
To set NAT router limits see
(Optional) Displays the TWCB maximum bindings limit.
(Optional) Displays the TWCB cache size limit.
(Optional) Displays the TWCB configuration limit.
set router limits (LSNAT) on page
set router limits (NAT) on page
show router limits (TWCB)
19-33.
18-14.