Clear Maclock Firstarrival; Set Maclock Static - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring MAC Locking
Mode
Switch command, Read‐Write.
Example
This example shows how to move all current first arrival MACs to static entries on fe.1.3:
Matrix(rw)->set maclock move fe.1.3

clear maclock firstarrival

Use this command to reset the number of first arrival MAC addresses allowed per port to the
default value of 600.
Syntax
clear maclock firstarrival port-string
Parameters
port_string
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to reset MAC first arrivals on fe.2.3:
Matrix(rw)->clear maclock firstarrival fe.2.3 6

set maclock static

Use this command to restrict MAC locking on a port to a maximum number of static (management
defined) MAC addresses for end stations connected to that port.
Syntax
set maclock static port_string value
Parameters
port_string
value
24-8 Security Configuration
Specifies the port on which to reset the first arrival value. For a detailed
description of possible port_string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Specifies the port on which to limit MAC locking. For a detailed
description of possible port_string values, refer to "Port String Syntax
Used in the CLI" on page 4‐2.
Specifies the number of static MAC addresses to be allowed
connections to the port. Valid values are 0 to 20.
clear maclock firstarrival