Show Flowlimit Class - Enterasys Matrix DFE-Gold Series Configuration Manual

Configuring Flow Setup Throttling (FST)
disable
userport | serverport
| aggregateduser |
interswitchlink |
unspecified
Defaults
• If not specified, all action types will be removed.
• If not specified, the action will be removed from all port classifications.
Mode
Switch command, Read‐Write.
Example
This example shows how to remove flow limiting action 1 from all port classifications:
Matrix(rw)->clear flowlimit action1

show flowlimit class

Use this command to display flow limiting classification configuration(s).
Syntax
show flowlimit class [userport | serverport | aggregateduser | interswitchlink |
unspecified]
Parameters
userport | serverport
| aggregateduser |
interswitchlink |
unspecified
Defaults
If port classification type is not specified, information related to all classifications will be
displayed.
Mode
Switch command, Read‐Only.
24-30 Security Configuration
(Optional) Removes the disable action.
(Optional) Removes this action configuration from the user
classification port type:
• user port
• server port
• aggregation port
• inter‐switch link
• unspecified port
(Optional) Displays flow limiting information related to the following
classification:
• user port
• server port
• aggregation port
• interswitch link
• unspecified port
show flowlimit class