clear spantree maxconfigurablestps
Example
This example shows how to set the STP max configs to 8:
Matrix(rw)->set spantree maxconfigurablestps 8
clear spantree maxconfigurablestps
Use this command to clear the setting for the maximum number of user configurable Spanning
Tree instances.
Syntax
clear spantree maxconfigurablestps
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Write.
Example
This example shows how to clear the STP max configs setting:
Matrix(rw)->clearspantree maxconfigurablestps
show spantree mstilist
Use this command to display a list of Multiple Spanning Tree (MST) instances configured on the
device.
Syntax
show spantree mstilist
Parameters
None.
Defaults
None.
Mode
Switch command, Read‐Only.
Example
This example shows how to display a list of MST instances. In this case, SID 2 has been configured:
Matrix(rw)->show spantree mstilist
Configured Multiple Spanning Tree instances: 2
Configuring Spanning Tree Bridge Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-13