Set Policy Port; Show Policy Allowed-Type - Enterasys Matrix DFE-Gold Series Configuration Manual

set policy port

set policy port
Use this command to assign an administrative rule to a port.
Syntax
set policy port port-name admin-id
Parameters
port‐name
admin‐id
Defaults
None.
Mode
Switch command, Read‐Write.
Usage
The set policy rule command ("set policy rule" on page 8‐13) used with the admin‐profile
parameter will associate a classification rule with a policy profile index number, thus making an
administrative rule.
Example
This example shows how to assign an administrative rule with an index of 20 to port fe.1.3:
Matrix(rw)->set policy port fe.1.3 20

show policy allowed-type

Use this command to display a list of currently supported traffic rules applied to the
admininstrative profile for one or more ports.
Syntax
show policy allowed-type port-string [-verbose]
Parameters
port‐string
‐verbose
Defaults
If ‐verbose is not specified, summary information will be displayed.
Mode
Switch command, Read‐Only.
Specifies the port(s) on which to set assign an administrative rule. For a
detailed description of possible port‐string values, refer to "Port String
Syntax Used in the CLI" on page 4‐2.
Specify a policy profile index number with a valid range of [1..63].
Specifies port(s) for which to display traffic rules.
(Optional) Displays detailed information.
Enterasys Matrix DFE-Gold Series Configuration Guide 8-17
Assigning Classification Rules to Policy Profiles