Set Dhcp Pool Default-Router; Clear Dhcp Pool Default-Router - Enterasys C3G124-24 Configuration Manual

Parameters
poolname
Defaults
Clears the lease time for this address pool to the default value of one day.
Mode
Switch command, read-write.
Example
This example restores the default lease duration of one day for address pool "auto1."
C3(rw)->clear dhcp pool auto1 lease

set dhcp pool default-router

Use this command to specify a default router list for the DHCP clients served by the address pool
being configured. Up to 8 default routers can be configured.
Syntax
set dhcp pool poolname default-router address [address2 ... address8]
Parameters
poolname
address
address2 ... address8
Defaults
None.
Mode
Switch command, read-write.
Example
This example assigns a default router at 10.10.10.1 to the address pool named "auto1."
C3(rw)->set dhcp pool auto1 default-router 10.10.10.1

clear dhcp pool default-router

Use this command to delete the default routers configured for this address pool.
Syntax
clear dhcp pool poolname default-router
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the name of the address pool. Pool names may be up to 31
characters in length.
Specifies the IP address of a default router.
(Optional) Specifies, in order of preference, up to 7 additional default
router addresses.
set dhcp pool default-router
Enterasys C3 Configuration Guide 22-23