Removing And Installing Charge Air Cooler - Skoda Octavia II 2004 Workshop Manual

1 - 5 Nm
2 - Mounting bracket
❑ Check fitting position
3 - Charge air cooler
❑ Removing and installing
⇒ page 197
4 - top seal
❑ fitted onto charge air
cooler
5 - 3 Nm
6 - Charge pressure sender -
G31- / intake air temperature
sender - G42-
7 - O-ring
❑ Replace if damaged.
8 - Mounting bracket
9 - 5 Nm
10 - Connecting hose
11 - Charge air pipe
12 - Connecting hose
❑ to intake manifold flap
motor - V157-
13 - 8 Nm
14 - Connecting hose
❑ from exhaust turbo‐
charger
15 - bottom seal
❑ fitted onto charge air
cooler
2.5 Removing and installing charge air cool‐
er
Removing
– Remove coolant radiator.
♦ Motor code BKD, AZV:
♦ Engine code BMM:
– Remove front bumper ⇒ Body Work ⇒ Rep. gr. 63 .
– If not already done, disconnect connecting hoses from charge
air cooler.
– Remove screws for charge air cooler holder.
♦ Vehicles with engine code BKD, AZV:
♦ Vehicles with engine code BMM:
⇒ page 138
⇒ page 146
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 191
⇒ page 196
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
, Pos. 1
, Pos. 1
2. Charge-air system with exhaust gas turbocharger - Part 2
197