Skoda Octavia II 2004 Workshop Manual page 47

Tightening order for engine support
Caution
The tightening sequence and the tightening torque of the fixing
screws for the engine support must definitely be respected.
Otherwise stress of the engine support bracket occurs, which
results in the breaking of the engine support bracket.
1. Screw in screws -1...3- by hand first.
2. Then tighten the screws to 40 Nm in the sequence -1...3-.
3.
Then tighten the screws a further 180° (
quence -1 ... 3-.
Note
To do so, lift or lower the engine with the supporting device -
♦
T30099 - .
Before the engine mount is installed, all the screws of the en‐
♦
gine support must be tightened to the specified tightening
torque.
I: engine mount for vehicles up until 02.2007
II: engine mount for vehicles from 03.2007
1.3.1 Removing toothed belt
Special tools and workshop equipment required
♦ Supporting device - T30099-
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
♦ Surface - T30099/1-
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
♦ Hook - MP 9-200/10 (10-222A/10)-
♦ Locking pin - 3359- or -MP 1-301 -
♦ Locking pin - T10060- or -T10060A -
♦ Crankshaft arrester - T10050- or crankshaft arrester - T10100-
♦ Pressure pad - T10172 - with stud - T10172/4-
♦ Offset screwdriver - T10264-
♦ Rig tool - T10265-
♦ Pliers for spring-type clips
♦ Locking agent - D 000 600 A2-
Note
Mark the direction of rotation with chalk or a felt-tip pen before
removing the V-ribbed belt. Reversing the rotation direction of an
already used belt may destroy it.
– Remove V-ribbed belt
– Remove charge air pipe for intake manifold flap motor -
V157- .
– Safety instructions when working on the injection system
⇒ page 3 .
1
/ 2 turn) in the se‐
⇒ page 23 .
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Disassembling and assembling engine
41