Skoda Octavia II 2004 Workshop Manual page 170

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Through the opening of the fuel tank, disconnect the fuel line
-1- to the vacuum pump by pressing the release button.
– Unhook the fuel delivery line -2- at the fuel delivery unit, to do
so pull the fixing clamp upwards -arrow-.
Note
You must wear protective gloves for removing the fuel delivery
♦
unit.
Remove fuel pump from the fuel tank so that the electric cables
♦
and fuel hoses are not damaged and the float arm of the send‐
er for fuel gauge display - G- is not bent.
You must empty the old fuel delivery unit before disposing of
♦
it if you wish to replace it.
– Pull the fuel delivery unit out of the opening of the fuel tank.
Fuel delivery unit type two
– Disconnect the plug as well as the black fuel feed line -1- and
the blue fuel return-flow line -2- from the flange.
Note
Press in the securing ring in order to unlock the line.
♦
For vehicles with auxiliary heating the suction hose for the
♦
dosing pump - V54- must be pulled out additionally (open low‐
er clamp).
– Open lock ring with the wrench - T30101 - .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
164
Rep. gr.20 - Fuel supply system