Skoda Octavia II 2004 Workshop Manual page 138

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
19 - Distributor part
20 - 15 Nm
21 - Hose
❑ from the engine oil cooler
22 - to the coolant expansion reservoir
❑ Connection diagram for coolant hoses
23 - Coolant pipe
24 - Hose
❑ to bottom radiator
25 - Coolant temperature sender at radiator outlet - G83-
26 - Connection fitting
❑ with coolant regulator
❑ with coolant temperature sender at radiator outlet - G83-
27 - Coolant regulator
❑ Removing and installing
❑ check: heat up regulator in a water bath
Start of opening approx. 87 °C
completely open approx. 102°C
Stroke: at least 7 mm
28 - Hose
❑ to engine oil cooler connection from cylinder block
29 - Engine oil cooler
❑ Removing and installing
30 - Coolant pump
❑ check smooth operation
❑ Check fitting position
❑ Removing and installing
31 - to the coolant expansion tank at the top
❑ Connection diagram for coolant hoses
32 - Top coolant pipe
❑ bolted to intake manifold
33 - Hose
❑ from the flap of radiator for exhaust gas recirculation to the coolant pipe at the top (Pos. 32)
34 - Radiator flap for exhaust gas recirculation
❑ Removing and installing
132
Rep. gr.19 - Cooling
⇒ page 133
⇒ page 147
⇒ page 122
⇒ page 147
⇒ page 133
⇒ page 241
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�