Skoda Octavia II 2004 Workshop Manual page 94

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Remove the release pin -arrow 1- and open the knurled nut
-arrow 2-.
– Disconnect the central plug connection for unit injectors and
uncover the wiring harness.
– Remove plug for fuel temperature sender - G81 - .
– Disconnect the edge connector from the glow plugs.
– Unscrew the fixing screws for the oil dipstick guide tube, pull
out the oil dipstick guide tube to the top out of the cylinder
block.
– Disconnect coolant hose -1- at exhaust gas recirculation radi‐
ator.
– Remove connection pipe for exhaust gas recirculation radiator
-arrows-.
Vehicles with four-wheel drive
– Unscrew the screw for the right flange shaft -arrow 1-.
– Remove right flange shaft ⇒ Gearbox ⇒ Rep. gr. 39 .
Continued for all vehicles
– Unscrew screw -2- and hollow screw -3-.
– Rotate the turbocharger support 90° and pull it down and out
of the oil return line.
88
Rep. gr.15 - Cylinder head, valve gear
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�