Skoda Octavia II 2004 Workshop Manual page 19

– Successively release screws for engine mounting -arrows-.
– Successively release screws for gearbox mounting -arrows-.
Note
Check whether all hose and line connections between engine,
♦
gearbox and body are released.
When lowering carefully guide the engine with the gearbox, in
♦
order to avoid damage.
– Carefully lower engine with gearbox.
– Remove the gearbox from the engine ⇒ gearbox ⇒ Rep. gr.
34 .
1.1.1 Removing and installing engine trim
panel
Removing
Vehicles with engine code BKD, AZV
– Remove dipstick -1- from dipstick guide.
– Lift engine cover at the sides -arrows 2- and pull out towards
the front -arrow 3-.
– Insert the dipstick into the dipstick guide so that no parts fall
into the opening.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing engine
13