Repairing Unit Injectors For Engines With Code Bkd, Azv; Removing And Installing Unit Injectors For Engines With Code Bkd, Azv - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1.6

Repairing unit injectors for engines with code BKD, AZV

Note
Observe rules for cleanliness
1 - 3 Nm + torque a further 270°
3
( / 4 turn)
❑ replace
Note
Further torquing angle 270° must be
carried out in one go!
2 - Valve-lever shaft
❑ Removing and installing
⇒ page 210
3 - 20 Nm + torque a further 90°
1
( / 4 turn)
❑ replace
4 - Adjusting screw
❑ replace
❑ Grease the contact sur‐
face to the ball stud of
the unit injector using
grease - G 000 100- .
5 - Lock nut - 30 Nm
6 - The unit injector
❑ Removing and installing
⇒ page 210
❑ When installing, grease
O-rings and pipes in cyl‐
inder head
7 - O-ring
❑ Replace ⇒ page 215
8 - O-ring
❑ Replace ⇒ page 215
9 - Cylinder head
1.7 Removing and installing unit injectors
for engines with code BKD, AZV
Special tools and workshop equipment required
♦ Universal dial gauge bracket - MP 3-447 (VW 387)-
♦ Valve lever - MP1-211 (VW 541/1A)-
♦ Valve assembly device - MP1-213 (2036) -
♦ Retaining plate - MP1-213/1 (2036/1)-
♦ Extractor - T10133/3-
210
Rep. gr.23 - Mixture preparation - injection
⇒ page 2 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�