Fan Shroud For Radiator Fans V7 And V35 For Engines With Code Bmm Removing And Installing - Skoda Octavia II 2004 Workshop Manual

– Connect coolant hose at rear of radiator -arrow-.
Select the appropriate coolant additive from the ⇒ Electronic
Catalogue of Original Parts or from the list of allowed coolant ad‐
ditives ⇒ Maintenance ; Booklet Octavia II .
– In a clean reservoir mix water and coolant additive in the cor‐
rect mixing ratio ⇒ Maintenance ; Booklet Octavia II .
– Top up coolant through the neck of the expansion reservoir,
until it reaches the max. marking.
– Switch off the heater unit and air conditioning unit.
– Start engine and run at a speed of approx. 1500 rpm for max.
2 minutes. When doing so, fill coolant into the expansion tank
up to the max. marking.
– Tighten the cap of the coolant expansion reservoir.
– Run engine until fan starts.
– Check coolant level when the expansion reservoir is closed.
• When engine is at operating temperature the coolant level
must be at the maximum marking, when engine is cold be‐
tween the minimum and the maximum markings.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
WARNING
Hot steam may escape when the expansion reservoir is
opened. Wear safety goggles and safety clothing to avoid eye
injuries and scalding. Cover the cap with a cloth and open
carefully.
– If necessary, top up with coolant.
Further installation occurs in reverse order.
1.11 Fan shroud for radiator fans - V7- and -
V35- for engines with code BMM Re‐
moving and installing
– Remove engine cover
– Remove the air filter with air guide hose from the lock carrier
⇒ page 220 .
– Remove noise insulation ⇒ Body Work ⇒ Rep. gr. 50 .
⇒ page 13 .
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing parts of the cooling system
145