Skoda Octavia II 2004 Workshop Manual page 242

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Unscrew lambda probe -3-.
– Remove exhaust gas temperature sender 2 - G448- ( temper‐
ature sender upstream particle filter - G506- ) -5-.
– Unbolt bracket -2- for pressure lines.
– Unbolt pressure line -4- at diesel particle filter.
– Remove fixing clamp -1- for diesel particle filter.
– Unscrew exhaust gas temperature sender 3 - G495- ( tem‐
perature sender downstream particle filter - G527- ) -1- from
exhaust pipe downstream diesel particle filter.
– Unscrew pressure line -2- for exhaust gas pressure sensor 1
- G450- .
– Disconnect plug -arrow- and remove exhaust gas pressure
sensor 1 - G450 - with pressure lines.
– Remove screws -2- and -3-.
236
Rep. gr.26 - Exhaust system
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�