Skoda Octavia II 2004 Workshop Manual page 142

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Detach the rear coolant hose on the engine oil cooler -arrow-
and drain residual coolant.
Vehicles with auxiliary heating
– Remove the coolant hoses on the pipes of the auxiliary heating
and drain residual coolant.
Filling up
Note
Replace O-rings.
– Connect coolant hose at bottom of radiator -arrow-.
– Connect the coolant hose on the engine oil cooler at the rear
-arrow-.
Vehicles with auxiliary heating
– Place the coolant hoses onto the pipes of the auxiliary heating
and secure with spring strap clamps.
Select the appropriate coolant additive from the ⇒ Electronic
Catalogue of Original Parts or from the list of allowed coolant ad‐
ditives ⇒ Maintenance ; Booklet Octavia II .
– In a clean reservoir mix water and coolant additive in the cor‐
rect mixing ratio ⇒ Maintenance ; Booklet Octavia II .
136
Rep. gr.19 - Cooling
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�