Skoda Octavia II 2004 Workshop Manual page 92

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
– Remove coolant hose between engine and radiator -arrows-.
– Remove charge air pipe between the exhaust turbocharger
and the charge air cooler
– Safety instructions when working on the injection system
⇒ page 3 .
– Detach the fuel intake hose -2- and the fuel return hose -1-
from the fuel lines.
– Detach coolant hose -3-.
Vehicles with auxiliary heating
– Disconnect the fuel feed line.
Continued for all vehicles
– Remove pre-exhaust pipe with diesel particle filter
⇒ page 234 .
Note
On vehicles with four-wheel drive, the exhaust pipe with diesel
particle filter can remain in the engine compartment and the angle
gearbox must not be removed.
– Disconnect plug connection -5- for exhaust gas temperature
sender 1 - G235- ( temperature sender upstream turbocharger
- G507- ) and expose cable.
– Disconnect plug connection at exhaust gas recirculation cool‐
er change-over valve - N345- -arrow-.
86
Rep. gr.15 - Cylinder head, valve gear
⇒ page 196 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�