Skoda Octavia II 2004 Workshop Manual page 31

Guide pulley tightening torque - vehicles with large engine support
(only for vehicles with engine code BKD, AZV)
Screw -arrow- with inside thread for fixing the engine support.
•
Tightening torque: 90 Nm + torque a further 90° (
Removing
– Remove engine cover
Vehicles up to 08.05
– Unlatch fuse, remove fuel filter upwards from bracket -arrow-
with its connected lines, and place to the side.
Vehicles as of 08.05
– Release screw -1- by one turn.
– Release screw -2- and nut -3-.
– Take out fuel filter with connected hoses and lay to the side.
Continued for all vehicles
Note
Mark the direction of rotation with chalk or a felt-tip pen before
removing the V-ribbed belt. Reversing the rotation direction of an
already used belt may destroy it.
Vehicles with auxiliary heating
– Remove bottom part of right wheelhouse liner ⇒ Body Work
⇒ Rep. gr. 66 .
Continued for all vehicles
⇒ page 13 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1
/ 4 turn).
1. Disassembling and assembling engine
25