Mixture Preparation - Injection; Repairing Diesel Direct Injection System; Installation Locations For Engines With Code Bkd, Azv - Overview - Skoda Octavia II 2004 Workshop Manual

Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
23 –

Mixture preparation - injection

1 Repairing Diesel Direct Injection sys‐
tem
The control unit is equipped with event memory. Before repairs,
setting operations and fault finding, query the event memory and
run self-diagnosis ⇒ Vehicle diagnostic tester.
Note
♦ Faults can be detected by the control unit as checking and
adjustment work is being undertaken and then saved. It is
therefore essential to always delete the event memory after
completing all checking and adjustment work ⇒ Vehicle diag‐
nostic tester.
Safety precautions when working on the diesel direct injection
♦
system ⇒ page 3 .
1.1

Installation locations for engines with code BKD, AZV - overview

Note
Some components are mounted under the engine cover.
♦
Remove engine cover
♦
The components A through G are not represented in the overview
figure.
202
Rep. gr.23 - Mixture preparation - injection
⇒ page 13 .
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�