Draining And Topping Up Coolant For Engines With Code Bkd, Azv - Skoda Octavia II 2004 Workshop Manual

1.4 Draining and topping up coolant for en‐
gines with code BKD, AZV
Special tools and workshop equipment required
♦ Catch pan for workshop cranes , e.g. -VAS 6208-
♦ Pliers for spring-type clips
♦ Refractometer - T10007-
Draining
Note
Collect drained coolant in a clean container for proper disposal or
reuse.
WARNING
When opening the coolant expansion reservoir, hot steam or
hot coolant may escape. Cover the cap with a cloth and open
carefully.
– Open the cap of the coolant expansion reservoir.
– Remove noise insulation ⇒ Body Work ⇒ Rep. gr. 50 .
– Place a catch pan under the engine.
– Remove connecting hose on right; to do so, lift retaining clips
-arrows-.
WARNING
Shut off the opening of the charge air cooler, e.g. with a clean
foam piece, so that no coolant can penetrate.
– Remove the coolant hose from the radiator; to do so pull the
retaining clip -arrow-.
– Remove engine cover
– Remove the air guide hose between the lock carrier and air
filter.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�
⇒ page 13 .
Octavia II 2004 ➤ , Octavia II 2010 ➤
2.0/100; 103 kW TDI PD Engine - Edition 01.2018
1. Removing and installing parts of the cooling system
135